Please, please help :(

[Welsh]

yeah but now i have money.

I spent 500quid! Sooo, cya tomorrow/thurs night ;)

[Sky]

Ram

http://www.novatech.co.uk/novatech/prod ... 00C5C.html

Motherboard

http://www.novatech.co.uk/novatech/prod ... -MPRO.html

Processor

http://www.novatech.co.uk/novatech/prod ... GIBOX.html

Graphics

http://www.novatech.co.uk/novatech/prod ... 501GB.html

The mobo and processor are compatible (i thinkk!) Am i right? Aannd, am i going to need a fan? Or will the one in my PC be ok? Lol! Are these okay Sky? It works out at 340 (roughly!)

If you can stretch a little further or cut back on the cpu a little how about this MB & Ram?
http://www.novatech.co.uk/novatech/prod ... TDPRO.html
http://www.novatech.co.uk/novatech/prod ... 33C9A.html

DDR3 and a 770 crossfire MB, it will let you add 2nd gfxcard later if you want.

DON'T FORGET A PSU, midrange 600w will do for now or 7-800w for future.

[Welsh]

Hehee.....

I didnt get that mobo...if needs be ill change it next summer (when i planned to spend the money i spent! Grrrrrr, lol!) I have a NGTX260 graphics card thooo, cos my friend reccomended! And the mobo i have takes DDR3! :S i was confuzzled, i cant remember why but yeahh! WHOS ON TONIGHT?

Ps Sky-i bought a 700W PSU cos i thought id neeed and games said id need one ;)

And i bought a new case....mine was too small :P I now have a case yayyy! My friend will fix it up tonightt Cod4? Or Farcryy?:)

[Porky]

WHOS ON TONIGHT?

[Welsh]

ok guys,basically we connected everything up, buut the monitors nt displayin graphics,so i duno whats wrong! Help

[GrumpyOG]

the 785G has built in graphics so make sure you configure in bios to use your card. If your monitor has dual inputs you can connect one to m/b and one to graphics card, if not wire up to the motherboard and boot into bios, then select external pcie card and reboot after swapping the lead.

[Welsh]

we cant get on bios as nuthin appears on the screen it just stays black

[GrumpyOG]

have you tried the built in graphics port?? if that doesn't work try removing the graphics card and trying again

[ReDAnT]

clear cmos?

[umbongo(uk)]

tits prolly grounded the board

build the [f*cker] out of the box ,see that every thing is ticking over ,then stuff it in the box
simple

if it does it again means u left a stand off on the case tray were the board sits ,,simply check they all line up with the holes your going to put screws in to hold the board inside the case

also check u have all the connectors plugged in the board 24pin and 4 pin

dont forget to give the nvid260 power from the psu via the 6 pin plug in

still having issues simply use only these thing to boot up

psu,cpu,onboard graphics,1 stick of ram you should get the bios screen once u see it switch off and only add the hard drive ,now see if it boots into windows ,if it does switch off and add the gfx card WITH IT EXTERNAL 6pin power plug

also did the motherboard need a bios update to run the new cpu ?????? if it does then all of the above is useless until its been update
goodnight